Global Cache Flex Link Relay Cable (Contact Closure) (FLC-RS)

Description

The Global Cache Flex Link Relay Cable (Contact Closure) is an advanced Flex Link cable for use with an iTach Flex WiFI or iTach Flex IP. The cable allows you to connect multiple relay devices to your network, and offers status reporting for each connected device. This is made possible by four configurable contact closure outputs and four configurable voltage and contact closure sensor inputs. External devices are connected via push-release terminal blocks.
Connects multiple relay devices to a wired or wireless network
Four configurable relay outputs; four configurable sensor inputs
Configurable/controllable from setup web page
Can mount directly on a DIN rail; no power supply required
NOTE: Requires either the iTach Flex WiFI or the iTach Flex IP (sold separately).
Product Features
Web-based control protocol using HTTP
Control and monitor equipment using just one cable
HTTP API and TCP API available
LED indicators to show state of sensor inputs and relay outputs
Simple push release terminals allow for quick setup
Easily configurable for common relay types to allow full control of your devices
Made in the USA and RoHS compliant
Technical Details
Manufacturer Part #:
FLC-RS
Setup:
Configurable using hardware jumpers and through iTach Flex integrated web server or software API
Relay Outputs:
4 Integrated SPST relays with transient voltage suppression and easy push release terminal blocks; 24V AC/DC or 0.5A N.O. contact relays; Allows for isolated switching of low voltage wiring.
Relay Configurations:
Relay outputs are configurable into common relay types: Single Pole Single Throw (SPST); Single Pole Double Throw (SPDT); Double Pole Double Throw (DPDT)
Sensor Inputs:
4 configurable inputs; Voltage or contact closure sense modes.
Voltage Sense Mode:
Sense AC/DC voltages ±3V (RMS) to ±24V (RMS)
Contact Closure Mode:
Sense contact closure; Use for input from devices or feedback from external relays.
Cable/Connector:
3.5mm four conductor jack to Flex Link Port on iTach Flex devices; 4 easy push four terminal blocks for relay and sensor connections; 4.5-foot cable; No power supply required
Relay Rating:
Max. Voltage: 24V
Max. Current: 500mA
Input Voltage AC/DC:
Min: ±3V (RMS)*
Max: ±24V (RMS)
Input Current:
Min: 200µA
Input High to Low Response:
Min: 1.5ms**
Max: 3ms**
Input Low to High Response:
Min: 110ms**
Max: 250ms**
Contact Closure Detection Source Current:
Max: 2mA
Mounting:
Enclosure is DIN rail mountable; Allows for simple installation in any location.
Dimensions:
3.24(W) x 2.0(L) x 0.9(H) inches
Warranty:
2-Year Limited