Supermicro X11SSH-LN4F mother board

Description

Item as;
1 x Supermicro X11SSH-LN4F motherboard (
Mother board box is not original, serial number is not matching
)
*** this motherboard was Ran Fully tested, installed win10 & Memtested for over 24 hours***
Specifications
Product SKUs
MBD-X11SSH-LN4F
·
X11SSH-LN4F
Physical Stats
Form Factor
·
Micro-ATX
Dimensions
·
9.6" x 9.6" (24.38cm x 24.38cm)
Processor/Cache
CPU
·
Intel® 7th/6th Generation Core i3 series, Intel® Celeron®, Intel® Pentium®, Intel® Xeon® processor E3-1200 v6/v5.
·
Single Socket H4 (LGA 1151) supported, CPU TDP support 80W
Note
·
BIOS version 2.0 or above is required to support 7th Generation Intel® Core™ i3 Processors and Intel® Xeon® Processor E3-1200 v6 series
System Memory
Memory Capacity
·
64GB Unbuffered ECC UDIMM, DDR4-2400MHz, in 4 DIMM slots
Memory Type
·
2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs
DIMM Sizes
·
4GB, 8GB, 16GB
Memory Voltage
·
1.2V
Error Detection
·
Corrects single-bit errors
On-Board Devices
Chipset
·
Intel® C236
SATA
·
Intel® C236 controller for 8 SATA3 (6 Gbps) ports; RAID 0,1,5,10
IPMI
·
ASPEED AST2400 BMC
Network Controllers
·
Quad LAN with Intel® Ethernet Controller I210-AT
Graphics
·
Aspeed AST2400 BMC
Input / Output
USB
·
6 USB 2.0 ports (2 rear + 4 headers)
·
5 USB 3.0 ports (2 rear + 2 headers + 1 Type A)
Video Output
·
1 VGA port
Serial Port / Header
·
2 COM Ports (1 rear, 1 header)
TPM
·
TPM Header
Expansion Slots
PCI-E
·
1 PCI-E 3.0 x8 (in x16 slot),
·
1 PCI-E 3.0 x8,
·
1 PCI-E 3.0 x4 (in x8 slot)
M.2
·
M.2 Interface: PCI-E 3.0 x2
·
Form Factor: 2280
·
Key: M-Key
·
Double Height Connector
System BIOS
BIOS Type
·
128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
·
Plug and Play (PnP)
·
APM 1.2
·
PCI 2.3
·
DMI 2.3
·
ACPI 1.0 / 2.0 / 3.0 / 4.0
·
USB Keyboard support
·
Hardware BIOS Virus protection
·
SMBIOS 2.7.1
·
UEFI 2.3.1
Management
Software
·
Intel® Node Manager, IPMI2.0, NMI, SPM, SSM, SUM, SuperDoctor® 5, Watchdog
Power Configurations
·
ACPI Power Management
·
Power-on mode for AC power recovery
PC Health Monitoring
Voltage
·
+12V, +3.3V, +5V, +5V standby, Chassis intrusion header, Monitors CPU voltages, Supports system management utility, System level control, VBAT
FAN
·
5x 4-pin fan headers (up to 5 fans), Fan speed control, Overheat LED indication, Thermal control tachometer fan connectors
Temperature
·
PECI, Thermal Monitor 2 (TM2) support, Monitoring for CPU and chassis environment, CPU thermal trip support
LED
·
CPU / System Overheat LED, UID/Remote UID
Other Features
·
Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, M.2 NGFF connector, VHD, WOL
Operating Environment
Operating Temperature Range
·
0°C ~ 50°C (32°F ~ 122°F)
Non-Operating Temperature Range
·
-40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
·
8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
·
5% - 95% (non-condensing)
*** Please feel free contact me for any question, Thank you! ***